When you’re a woodworker by profession or you just like to play with woods or ply, there are chances that you struggle with straight cuts while using a circular saw. Circular saws are the most common type among the saw. They come up with easy features and facilities and every woodworker must have one of a circular saw.
When the problem is straight cuts, a guide can really help you out. It’ll make your cutting easier and straight as it has a scale attached to it and it works with the fence. There are various brands that make circular saw guide.
This article is about Kreg Rip cut circular saw guide. In here, you can find the review of this particular saw guide and how to set it up for better cuts.
Kreg Rip-Cut Circular Saw Guide
The brand Kreg made it easier for straight cuts and they came up with a guide though this one works well for Accu cuts as well. It works great for plywood sheets or the same material. It comes up with a universal size base plate that goes with both left and right-handed saws. The gap of this guide is 1 and 1/8 inches.
Before you start, make sure your blade guard isn’t wider than the 1 and 1/8 inch gap. Or else, you won’t be able to get the flexibility. There’s a stop block at the base that keeps your saw in place. You can loosen it when needed and adjust it according to the edge of your saw.
There are 2 clamps that clamp down on the front of your saw and they hold it tight. They both come up with screws so that you can tighten them and set your saw up. When you set up the saw, it’s time to set up the scale and it’s pretty simple.
All you need to do is to add it with the clamp at the front of the guide. There’s a locker that holds the scale tight and accurate. When you’re done, make sure that the cursor of the guide is pointing at zero of the scale. One disadvantage of this saw guide is it’s made with plastic and the screws attached to it will eventually get loosened.
When everything is set up, you can start cutting. Make sure the fence is giving proper grip and the saw guide is straight. When you’re holding the edge part, don’t push it harder as it’s made with plastic, there are chances that it won’t be accurate.
The pros
- Made with high-quality plastic
- Comes up with every setting thing
- There’s a blocker included with adjustment
- Attaching the scale is super easy
- The cursor points pretty accurately
- The fence gives a great grip
- Fits with every kind of circular saw
The cons
- Made with plastic material
Conclusion
So, this rip cut circular saw guide from the brand Kreg is too much helpful. Though it’s made with typical plastic material, it can give you enough as it offers versatility. The scale makes your cut precise and accurate.
If you have any questions, feel free to leave a comment here or contact us directly. For more articles, visit our website.
