When it comes to playing around with gas, it’s better to be safe than sorry. Disconnecting a gas stove may seem to be tricky work as it is especially dangerous.
If you know nothing about linking the appliances or you have never dealt this task, read the instruction below and you will be confident that you know how to disconnect a gas stove by yourself!
Step 1: Move Out The Stove
The first thing you need to know about disconnecting your gas stove is to prepare the stove by moving the device out of the wall behind. To ensure that there is no scratching on your kitchen floor, prepare a large piece of wood, Masonite or a particle of board that fits the size of your kitchen.
You should put the wood ahead the stove and lift it off the floor gently. It is likely that some stoves may attach an anti-slip frame on it, which make the stove can’t tip. It is a safety appliance attached to the wall. If you out pressure on the door or ahead the appliance, the lower edge of the stove will slide into the anti-slip frame.
So what you need to do is look for a mental framework on the wall after sliding your stove off the wall a bit. If you see it, continue sliding your stove until the edge of the device separates from the anti-slip frame
To show the gas line connection. You have to slide the stove away from the wall. To do this, you can use wooden planks. Place the stove on the hind legs and push the wood below. Pull the back of the kitchen and slide the flat wood underneath for the rest of the road.
A nearby outlet is where we can plug in a conventional gas stove to give it enough electricity for its electric start mechanism. To reduce the necessary of pilot lights, most stoves are equipped with electric starters.
After that, you will have to find and unplug the wire that connects the stove to the power source. It is not a 220V as we often see on electric stove, it is the 110V one. You don’t have to take any extra tool to help release the plug as we can easily pull this cord out of the outlet.
Let’s get to know the rest of the way to disconnect the gas stove by moving to step 2.
Step 2: Disconnect The Gas
Getting to know how to disconnect the gas stove is simply trying to know the way to disconnect the gas line.
You need to learn the pipes connecting the stove to the gas outlet, it’s long and flexible and can be seen on the floor near the kitchen.
On the pipe, try to find the gas shutoff valve (which has a small lever). Turn the lever to cut the gas to the kitchen.
It is not easy to see the shutdown, you can search for the nearest shut-off valve by following the air path to the basement. If you still don’t find the breaker, you can look above or below the gas meter to see the main valve.
After turning off the gas, there is a device that connects your stove to the gas called a hose connector. You must use wrench to free it. Remember to keep the pipe connected to your kitchen to install into a new home.
When everything is done, if you have the idea of moving the kitchen out of the kitchen, use a wooden plank to complete it.
Now you may know how to disconnect the gas stove, but you also need to notice something!
Note:
Only on the first time you install the gas stove or you reposite it permanently, you have to call the professional. When you have it installed already, feel free to disconnect it if you know the way to disconnect the gas stove safely on your own.
Just in case, it is highly unlikely that a leakage is present and form moving bubbles, but to ensure safety, you should apply a mixture of water and dish soap on the valve inside the fitter after closing it by the time you have completed your job.
The Bottom Line
The idea of taking out any gas device, especially an integrated device, can be a little bit scary. However, the job is really not all that difficult if you have already read this article. With these instructions and helpful tips, you have nothing to worry about how to disconnect a gas stove on your own.
