Concrete work is common on any construction site, especially during the summer months. Concrete sawing safety is important any time concrete is worked on.
A concrete saw is one of the most powerful tools in the construction industry. It has a sharp spinning blade to cut through concrete, brick, asphalt, and stone.
These power tools come in different sizes and shapes.
The handheld concrete saw is the most common tool in the industry because it’s the least expensive on the market today.
Handheld tools are operated with a petrol and oil mixture.
Large construction sites use heavy-duty concrete cutting machines that are operated with the use of hydraulics.
You should know how to work safely with the concrete saw to prevent accidents and injuries in the workplace.
This article provides information on important guidelines for concrete sawing safety.
- Safety Tips To Prevent Injuries
- How To Start The Concrete Saw Safely?
- Choose A Reputable Concrete Cutting And Sawing Service
Safety Tips To Prevent Injuries
The most important thing is to follow the basics of safe concrete sawing and cutting which is practiced by most concrete cutting companies like Megasaw. Make sure you don’t saw too deep.
Only saw as deep as the job calls for. Sawing in a straight line will prevent many injuries in the process.
You should make sure the pointer is aligned with the saw blade when sawing concrete.
First, draw the cutting lines on the concrete by using a chalk box. This will keep the blade from binding when cutting and sawing concrete.
How To Start The Concrete Saw Safely?
The first thing is to check is the concrete saw’s fuel level. In most cases, it includes fuel and a two-cycle oil mixture.
Check the manual and follow the instructions when mixing the fuel before adding them to the concrete saw.
Face the concrete saw blade away from you and place the saw on the ground. Now switch it on. Some tools will have a primer button.
When you press the primer button, it will send the fuel to the engine to start the concrete saw quickly. The concrete saw should stand firm on the ground.
Grasp the handle of the concrete saw with one hand and pull its cord using the other hand. Once the concrete saw starts switch the choke in the “run” position.
Hold the throttle tightly and control the tool as it operates at full power. Let the diamond blade slowly sink into the concrete slab.
Don’t turn the saw while cutting as it may damage the blade. Walk forward to continue with the cutting process.
You may have to adjust the saw by lowering or raising it to control the cut smoothly.
Once you have cut the concrete to the depth you want, cut at a steady pace without letting the saw blade slip out.
If the saw blade stalls while cutting the concrete slab, make sure you pull it out of the cut and lower it back in.
Be extremely cautious when doing this since it can cause injuries when not done properly.
Don’t forget to realign the saw blade with the cut before reinserting the blade.